Typically from $38/ft
Vinyl Privacy Fence Installation
6 ft solid tongue-and-groove panels on 5x5 posts in concrete, built for SCV wind. The most-requested fence in the valley.
See Vinyl Privacy Fence Installation prices →Santa Clarita Vinyl Fence is a local guide and availability check for vinyl fence installation in the Santa Clarita Valley — 6 ft privacy fences, picket and ranch rail fencing, pool code barriers, walk and double drive gates and old-fence replacement in Valencia, Saugus, Newhall, Canyon Country, Stevenson Ranch, Castaic and Val Verde. See typical installed prices per foot for your fence style and lot, what a properly footed, wind-rated vinyl fence involves, and whether bookings are open in your area yet.
Illustration
Typically from $38/ft
6 ft solid tongue-and-groove panels on 5x5 posts in concrete, built for SCV wind. The most-requested fence in the valley.
See Vinyl Privacy Fence Installation prices →
Typically from $40/ft
5 ft climb-resistant vinyl barrier with self-closing gate and magnetic latch, built to the California Pool Safety Act dimensions.
See Vinyl Pool Fence (Pool Code Barrier) prices →
Typically from $350/gate
Single walk and side-yard gates on steel-reinforced posts, framed so they never sag, latched so they always close.
See Vinyl Gate Installation prices →
Typically from $42/ft
Old fence out, footings broken, everything hauled, new vinyl posts in fresh ground — the standard SCV backyard job.
See Wood-to-Vinyl Fence Replacement prices →











Heavy-wall perimeter, screening and enclosure fencing for properties and businesses, scheduled around operations.
Association-owned perimeter, greenbelt and common-area fencing, phased and priced for boards and managers.
Pick the style, enter the length of the fence line, add gates and site conditions. The range updates as you go and comes from the same Santa Clarita Valley market figures used on every page of this site.
Check availability and get your SCV price range
Bookings aren't open yet — describe the fence line and you get a Santa Clarita price range right here. Per-foot ranges are typical Santa Clarita Valley installed prices for white vinyl, materials and labor. This is a market estimate, not a quote; footage is measured on site and the installer prices the actual job. City permit fees and HOA fees, where they apply, are not included.
Illustration
Starting pointFinished layout (concept)
Illustration
Starting pointFinished layout (concept)
Illustration
Starting pointFinished layout (concept)
Illustration
Starting pointFinished layout (concept)
Concept illustrations, AI-generated — not photos of completed installations. No installation was performed or arranged through this site; prices are typical Santa Clarita Valley market ranges, not quotes.
Santa Clarita Vinyl Fence covers Valencia, Saugus, Newhall, Canyon Country, Stevenson Ranch, Castaic, Val Verde — pick your area from the menu for local details, ZIP codes and drive times.
Valencia5–10 min from Santa Clarita
Saugus10–15 min from Santa Clarita
Newhall10 min from Santa Clarita
Canyon Country10–20 min from Santa Clarita
Stevenson Ranch10 min from Santa Clarita
Castaic15–20 min from Santa Clarita
Val Verde20 min from Santa ClaritaInstalled white vinyl privacy fence runs about $38–$58 per linear foot in the Santa Clarita Valley in 2026, materials and labor. Picket fence comes in around $28–$44 per foot, ranch rail $20–$34, and 5 ft pool code fence $40–$60. Slopes, removing an old fence, rocky or caliche soil and gates add to the number. Local installers confirm a written price after walking the fence line — the ranges on this site are market estimates, not quotes.
In most Valencia and Stevenson Ranch planned communities, yes. The CC&Rs usually fix the height (6 ft is the common cap), the color (white or tan), the style for street-facing runs and sometimes the exact profile. An installer who works in the valley prepares the architectural submittal — a site plan, the fence drawing and a product sheet — and the review typically takes two to six weeks, so the submittal goes in before material is ordered. Approval is the HOA's decision and its timeline.
Yes, two ways. Ranch rail and picket fence can be racked, meaning the rails tilt to follow the grade while the posts stay plumb. Solid tongue-and-groove privacy fence does not rack well, so it is stepped: each panel stays level and drops a few inches at the next post, with the gap at the bottom closed by a longer picket or a trimmed panel. Canyon Country, Saugus and Newhall hillside lots usually get a stepped layout.
A solid 6 ft fence catches the full wind load, so the build has to account for it: 5x5 posts rather than 4x4, 6 ft spacing instead of 8 ft on exposed runs, footings 30 inches deep, and galvanized steel inserts in posts at corners, ends and along open ridgelines. Semi-privacy and picket styles let the wind through and are the safer choice on exposed Canyon Country and Castaic lots.
The Swimming Pool Safety Act and the building code call for a barrier at least 60 inches tall, no openings a 4 inch sphere can pass through, no more than 2 inches between the bottom rail and grade, no climbable horizontal members on the outside, and a gate that opens away from the pool, closes itself and latches itself with the release at least 60 inches up or on the pool side. A 5 ft vinyl picket or privacy fence with a self-closing hinge set and a magnetic latch is built to those dimensions; whether a yard meets the pool-barrier rules is decided at inspection by City of Santa Clarita Building and Safety (or LA County in unincorporated areas) and depends on the whole enclosure — house doors, alarms and gates — not on the fence alone.
A typical 120–150 ft backyard replacement runs two to three working days: one day to remove the old fence and set posts in concrete, a day for the concrete to cure, and a day to hang rails, pickets, caps and gates. Long ranch rail runs in Castaic or jobs with hard digging take longer. HOA review, where needed, happens before the first day on site.
For most SCV yards, yes. Vinyl needs no paint or stain, does not rot at the post base, does not warp in the heat and cleans with a hose. It costs more up front than pressure-treated wood (roughly $38–$58 vs $25–$40 per foot for privacy fence) but less over twenty years. Its honest weaknesses: it can crack from a hard impact in cold weather, it softens in radiant heat so it is not a fire barrier, and darker colors expand more in the sun. Installers featured on this site are independent businesses. The installer's legal name, license status where required and insurance type are published on this site before bookings open.
Typical SCV vinyl fence prices by the foot
Pick a style, enter the length, see the range. No contact details needed. Bookings open here once a local fence contractor is named on this site.